WHEN YOUR HOT WATER SYSTEM SUDDENLY CEASES WORKING: WHAT TO DO

When Your Hot Water System Suddenly Ceases Working: What to Do

When Your Hot Water System Suddenly Ceases Working: What to Do

Blog Article

Click Here To Read More

Just about everyone seems to have their own conception involving How to Troubleshoot and Repair an Electric Water Heater.


How to Troubleshoot and Repair an Electric Water Heater
Many modern-day residences utilize an electric hot water heater for their heating system, due to its convenience and ease of use. However, similar to any other electric devices, issues may develop with its usage, unexpectedly. It can be really discouraging to get up to a cold shower as opposed to a warm one or having your bath with water that isn't hot adequate and even too hot. Whatever the situation might be, hot water heater troubles can be rather nerve-racking. Luckily, we've made a list of possible remedies to your hot water heater issues. There are a variety of aspects that can create a number of these problems, it could be a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the major power supply for security. Whatever the trouble is, getting it fixed need to not posture excessive of a concern if you comply with these steps:

Call A Professional:


If after replacing all damaged components and resetting your temperature level, the water heater still isn't functioning, you may need to speak to a professional plumber for a professional viewpoint. The trouble with your heating unit could be that the cold and hot taps have actually been switched or it may be undersized for the quantity of hot water required in your home. Whatever the situation might be, an expert plumber would certainly help fix the problem.

Inspect Your Power Supply:


As basic as this may appear, it is extremely necessary. Without ample power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on once again. Change any damaged or damaged fuse. Test the appliance with power after these modifications to see if it's currently functioning.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't warm enough, you may need to examine the temperature level setups on your upper thermostat. Make sure the breaker is turned off before doing anything. Open the access panel and also press the red switch for temperature reset above the thermostat. This ought to assist warm the water. Transform the circuit breaker back on as well as inspect if the trouble has actually been fixed.

Inspect the Burner in the Hot Water Heater:


If it's not a power problem, then try taking a look at your burner if it is still functioning. Examine each of your heating elements to be sure the issue isn't with any one of them. If any one of them is damaged, change that component and afterwards examine whether the warm water is back on.

Verdict


Hot water heater problems are not always major. A lot of them are due to minor issues like a blown fuse or worn-out burner. Replacing the malfunctioning components ought to do the trick. Nevertheless, if you are still incapable to address the problem, give a call to your closest plumber to find to get it taken care of.


Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/


What Would Cause My Electric Water Heater to Stop Working?

We were brought to that write-up on Hot Water Heater Repair from a friend on another blog. Remember to take a moment to distribute this blog post if you appreciated it. I am grateful for your time. Don't forget to stop by our site back soon.


Maintain plumbing standards; contact us.

Report this page